T.E.S IT-SOLUTIONS
Cart
MCP7H50-V001

NVIDIA Mellanox

NVIDIA Mellanox MCP7H50-V001 200Gb/s QSFP56 to 2x100Gb/s Splitter DAC Cable 1m

Part no.MCP7H50-V001

€200.00

In stockCondition: New

Request a quote

Checkout runs on the secure Wix checkout page.

Form Factor
QSFP56 to 2x QSFP56 (Y-splitter)
Data Rate
200Gb/s split into 2x 100Gb/s
Cable Type
Passive Copper DAC (Hybrid Splitter)
Length
1m (fixed)

How this unit is built

Received, catalogued and inspected, and checked before it ships.

See the production flow

Description

NVIDIA Mellanox MCP7H50-V001 200Gb/s QSFP56 Passive Copper Hybrid Splitter Cable, 1m: This is a 1-meter passive copper Direct Attach Cable (DAC) that splits one 200Gb/s QSFP56 port into two independent 100Gb/s QSFP56 connections. The V001 variant is fully passive and uses 30AWG conductors. There is no FEC retimer, no electronics, no power draw. This is not a transceiver, not an Active Optical Cable, and not an active electrical cable. This is a new, factory-sealed unit.

Engineering Context

The MCP7H50 family bridges the HDR/200GbE generation to two HDR100 / 100GbE endpoints, doubling effective port density on the 200Gb/s side. The 200Gb/s QSFP56 end carries 4 lanes of 50Gb/s PAM4 signaling. Each 100Gb/s QSFP56 end carries 2 lanes of 50Gb/s PAM4 (HDR100). At 1m, the thinner 30AWG conductors keep the cable lightweight and flexible, easing routing in dense in-rack deployments. The cable is passive: signal integrity at 1m is well within the no-equalization margin, and the cable adds no end-to-end latency beyond propagation delay. Power consumption is 0W.

Deployment & Use Cases

In-rack fan-out from a 200GbE Spectrum-2 / SN3700 switch port to two ConnectX-5 or ConnectX-6 100GbE adapter ports placed in the same rack. ToR-to-server very-short-reach interconnects in HPC, AI training, and high-bandwidth storage clusters where the endpoints sit within 1m of the breakout port.

Technical Specifications

  • OEM: NVIDIA Mellanox
  • Part Number: MCP7H50-V001
  • Form Factor: QSFP56 to 2x QSFP56 (Y-splitter)
  • Data Rate: 200Gb/s split into 2x 100Gb/s
  • Cable Type: Passive Copper DAC (Hybrid Splitter)
  • Length: 1m (fixed)
  • Conductor Gauge: 30AWG
  • Power Draw: 0W (fully passive)
  • Condition: New — Factory-sealed

Compatibility & Hard Constraints

Designed for the NVIDIA Quantum HDR and Spectrum-2 family on the 200Gb/s end, paired with ConnectX-5 or ConnectX-6 adapters in HDR100 / 100GbE mode on the breakout ends. The 200Gb/s and 100Gb/s ends are not interchangeable. Not compatible with EDR-only ports that lack splitter support. Does not break out to SFP28 or QSFP28 form factors — both ends are QSFP56. Length is fixed at 1m and cannot be extended; 30AWG defines the practical reach.

Frequently Asked Questions (FAQ)

Q. What is the MCP7H50-V001?
The MCP7H50-V001 is a 1m passive copper splitter DAC: one QSFP56 head at 200Gb/s breaks out into two legs at 100Gb/s each.

Q. Does the switch need special configuration?
Yes. The head port must be configured for breakout mode.

Q. Will T.E.S IT-SOLUTIONS confirm the configuration of MCP7H50-V001 before shipping?
Yes. T.E.S IT-SOLUTIONS (tes-itsolutions.com) inspects each unit and verifies vendor markings before dispatch from EU stock.

Why Choose T.E.S IT-SOLUTIONS

T.E.S IT-SOLUTIONS supplies new, factory-sealed NVIDIA Mellanox passive cabling with global shipping and a 1–3 day handling window. Visit tes-itsolutions.com for fabric design consultation and full inventory.